Products

F01 SAFETY
15 Maggio 2019
T01
15 Maggio 2019
Show all

P01

Pressure switch

The P01 is based on the tried and tested pressure transmitter type M01. The integrated electronic switches (NPN or PNP) can be preconfigured ex-works. Alternatively, a toolkit is available which facilitates adjustment at the customer’s site.

TECHNOLOGIES

The Pressure Switch P01 has been designed especially for use in mobile machines. The EMC characteristics as well as the impact and vibration resistances have been designed for this field of application.

This facilitates their use in adverse ambient conditions such as can be found in mobile hydraulics. The P01 is available for pressure ranges from 0…10 bar to 0…1200, whereby a switching accuracy of 1% of the measurement range end value can be achieved.

The maximum permitted media temperature totals 150 ºC; the ambient temperature totals 125 ºC. The parts coming into contact with media have been produced from stainless steel (1.4548) and guarantee, in combination with the welded thin-film measurement cell, maximum media compatibility. Optionally, a damping device can be integrated into the media access.

Statements
P01 is a product of
Sensor-Technik Wiedemann GmbH
All rights are reserved.

 

Specifications

Pressure range, gauge0 … 10 bar to 0 … 1200 bar, other ranges available
Standard pressure range 25 bar 50 bar 100 bar 250 bar 400 bar 800 bar 1200 bar
Overload (per DIN EN 60770-1) 40 bar 100 bar 200 bar 500 bar 800 bar 1000 bar 1600 bar
Bursting pressure (per DIN EN 60770-1) 70 bar 500 bar 1000 bar2500 bar 4000 bar > 4000 bar > 4000 bar
Linearity, pressure hysteresis and repeatability< 0.5 % FS
Switch point accuracy≤ 1,0% FS (0 … +80 °C) / (+32 ... +176 °F)
≤ 1,5% FS (–25 … 0 °C and +80 … +100 °C) / (-13 ... +32 °F and +176 ... +212 °F)
≤ 2,5% FS (–40 … –25 °C and +100 … +125 °C) / (-40 ... 13 °F and +212 ... +257 °F)
Long term stability< 0,2 % FS p.a.
Media temperature−40 … +150 °C / -40 ... +302 °F
Operating temperature−40 … +125 °C / -40 ... +257 °F
Storage temperature−40 … +125 °C / -40 ... +257 °F
Voltage supply9 … 36 VDC (allowable ripple @ 50 Hz: 10%)
Output signal1 x PNP, 2 x PNP, 1 x NPN, 2 x NPN (Output current up to 500 mA)
Electronical protectionShort circuit protected, signal on GND/VCC and inverse-polarity protection
Electrical connectionM12 connector, DIN-Bayonet (per DIN 72585), DT04-3P, AMP Superseal 1.5; Cable output, other connectors
on request
Pressure connectionG 1/4, 1/4 NPT, G 1/4 with manometer, SAE04 (7/16-20UNF), SAE06 (9/16-18UNF), other pressure connectors on request, possible limitations of the pressure range
Protection classIP67 or IP6K9K (depends on the electrical connection)
Installation torqueup to 35 Nm
Material with medium contactStainless Steel AISI 630 (DIN EN 1.4542), AISI 316 L (DIN EN 1.4435) on request
Material housingAISI 304 (DIN EN 1.4301)
Material connectorPBT-GF30
Functional safety
Pressure switch P01Acc. DIN EN ISO 13849-1: Performance Level b
Cat. = B
MTTFd = High (d als Index tiefer stellen)
DC = None
CCF = Not relevant

• Optional setup interface available

Code: 1140203000900 PRESSURE SWITCH P01 G¼ M12

    Sì, sono interessato a ricevere notizie aggiornate e informazioni di marketing sui prodotti e servizi Motronica.
    Ho letto e compreso la Privacy Policy e i Termini e Condioni di questo sito