ESX-C
13 Febbraio 2017
ESX-LTplus
13 Febbraio 2017
ESX.ioxp
ESX.ioxp Control units
The ESX.ioxp is a small, compact and freelyprogrammable control unit from the 16-bit control unit family.
TECHNOLOGIES
Due to its compact construction, it mainly facilitates the automation of small machines and attachment devices. The control unit can be used optionally with four LS outputs for the realization of motor bridges and with four PVG outputs. It features an XC2287 processor with 80 MHz by Infineon and 768-kB Flash, 1-MB-RAM- and 8-kB EEPROM memory.
Software
The application software for the ESX.ioxp can be created highly efficiently either in “C” or in CODESYS V2.3 IEC61131.
In the programming interface, numerous convenient functions such as current controllers and ramp functions for outputs or frequency averaging for inputs are integrated.
Statements
ESX-ioxp is a product of
Sensor-Technik Wiedemann GmbH
All rights are reserved.
Specifications
| Description | Option 1 | Option 2 | Option 3 |
|
|---|---|---|---|---|
| Interfaces | ||||
| CAN | 2 | 2 | 2 | |
| RS232 | Programmable baud rate up to 1 15 kBit/s | 1 | 1 | 1 |
| System Data | ||||
| Power supply | 9 ... 32 V DC | |||
| Current con- sumption | Approx. 100 mA without power output, stand-by < 1,5 mA, total current max. 1 1 A | |||
| In/Outputs | ||||
| Digital /PWM output_4A_HS | ||||
| Digital/Speed input_HL_SW | Digital inputs, high/low active (configurable via software), configurable switching levels, short- circuit proof Or useable as Speed inputs, limit frequency 7 kHz, switching shafts freely configurable, short-circuit proof | |||
| Digital /PWM output_3A_ HSC | 3 A, high side switch, 0 ... 100%, short-circuit proof, diagnosable | 4 | 4 | 4 |
| Sensor supply_10V | Stabilized supply voltage, approx. 100 mA, short-circuit proof | 1 | 1 | 1 |
| Digital-/PWM- output_4A_HS | 4 A, high side switch, 0 ... 100%, short-circuit proof, diagnosable | 4 | 8 | |
| Analog input_ 20mA | Analog inputs, 4 ... 20 mA, 10 bit, short-circuit proof | 8 | 8 | 8 |
| Digital input_ HL_HW | 1 | |||
| Digital input_ HL_SW | Digital inputs, high/low active (configurable via software), configurable switching levels, short- circuit proof | 1, 2 | ||
| Analog input_10V | Analog inputs, 0 ... 10 V , 10 Bit, short-circuit proof. The inputs could be used as Digital inputs, too | 6 | 6 | 6 |
| Mechanical Data | ||||
| Connector | 42-pole, mobile-compatible connector ( T yco / AMP) | |||
| Housing | IP 6k7 and IP 6k9k, plastic housing | |||
| Dimensions | Approx. 134 mm x 1 17 mm x 36 mm (5.28" x 4.61" x 1.42") | |||
| Weight | Approx. 0.3 kg (0.67 lbs.) | |||
| Environmental Requirements | ||||
| Requirements | Inspections acc. standards and requirements for vehicle, agricultural machinery and the construction machinery industry as well as CE conformit y . E1-approval by the German Federal Motor V ehicle T ransport Authority (Kraftfahrt-Bundesamt) | |||
| T emperature range | -40°C ... +85°C (-40°F ... +185°F) housing temperature | |||
| Processor System | ||||
| EEPROM | 8 kByte | |||
| Processor | 16-bit controlle r , 80 MHz, system supervisor with W atchdog | |||
| SRAM | 1 MByte |
Code: 1030109000300 ECU IOXP OPT3
Prodotti correlati
ESX-C
13 Febbraio 2017ESX-LTplus
13 Febbraio 2017ESX-IOXp
ESX-IOXp
Controllere Compatto
L’ESX-IOXp è una piccola, compatta, unità di controllo facilmente programmabile, della famiglia delle unità di controllo a 16 bit.
Grazie al suo design compatto, questa centralina facilita l’automazione, soprattutto su piccole macchine e accessori.
Dichiarazioni
ESX-IOXp è un prodottoo di
Sensor-Technik Wiedemann GmbH
Tutti i diritti sono riservati.
Specifications
| Description | Option 1 | Option 2 | Option 3 |
|
|---|---|---|---|---|
| Interfaces | ||||
| CAN | 2 | 2 | 2 | |
| RS232 | Programmable baud rate up to 1 15 kBit/s | 1 | 1 | 1 |
| System Data | ||||
| Power supply | 9 ... 32 V DC | |||
| Current con- sumption | Approx. 100 mA without power output, stand-by < 1,5 mA, total current max. 1 1 A | |||
| In/Outputs | ||||
| Digital /PWM output_4A_HS | ||||
| Digital/Speed input_HL_SW | Digital inputs, high/low active (configurable via software), configurable switching levels, short- circuit proof Or useable as Speed inputs, limit frequency 7 kHz, switching shafts freely configurable, short-circuit proof | |||
| Digital /PWM output_3A_ HSC | 3 A, high side switch, 0 ... 100%, short-circuit proof, diagnosable | 4 | 4 | 4 |
| Sensor supply_10V | Stabilized supply voltage, approx. 100 mA, short-circuit proof | 1 | 1 | 1 |
| Digital-/PWM- output_4A_HS | 4 A, high side switch, 0 ... 100%, short-circuit proof, diagnosable | 4 | 8 | |
| Analog input_ 20mA | Analog inputs, 4 ... 20 mA, 10 bit, short-circuit proof | 8 | 8 | 8 |
| Digital input_ HL_HW | 1 | |||
| Digital input_ HL_SW | Digital inputs, high/low active (configurable via software), configurable switching levels, short- circuit proof | 1, 2 | ||
| Analog input_10V | Analog inputs, 0 ... 10 V , 10 Bit, short-circuit proof. The inputs could be used as Digital inputs, too | 6 | 6 | 6 |
| Mechanical Data | ||||
| Connector | 42-pole, mobile-compatible connector ( T yco / AMP) | |||
| Housing | IP 6k7 and IP 6k9k, plastic housing | |||
| Dimensions | Approx. 134 mm x 1 17 mm x 36 mm (5.28" x 4.61" x 1.42") | |||
| Weight | Approx. 0.3 kg (0.67 lbs.) | |||
| Environmental Requirements | ||||
| Requirements | Inspections acc. standards and requirements for vehicle, agricultural machinery and the construction machinery industry as well as CE conformit y . E1-approval by the German Federal Motor V ehicle T ransport Authority (Kraftfahrt-Bundesamt) | |||
| T emperature range | -40°C ... +85°C (-40°F ... +185°F) housing temperature | |||
| Processor System | ||||
| EEPROM | 8 kByte | |||
| Processor | 16-bit controlle r , 80 MHz, system supervisor with W atchdog | |||
| SRAM | 1 MByte |
