TC1
1 February 2017
OPUS A3 ECO BASIC
1 February 2017
Show all

TC3G

TC3G
TECHNOLOGIES

Recording and processing machine data, and networking the world of mobile machines with each other and with the Internet – that is the TC3G in a nutshell. Thanks to the use of the latest technologies in combination with an open Linux operating system, high integration capabilities and reliability are achieved.

The TC3G Data & Connectivity Platform
The on-board module ESX-TC3G offers a professional entry point into the world of STW networking and data management solutions. With its diverse interfaces, the Linux-based module communicates inside and outside of the vehicle network. Here WiFi, Bluetooth or 2G/3G are used. The integrated navigation satellite systems GPS and GLONASS permit accurate positioning of the commercial vehicles, which can even be adjusted to within a few centimeters through calculation correction data. All the recorded data can be transmitted at any time to authorized users. The robust housing of the TC3G, which is qualified, dependent on the antennae connections, at least in accordance with device protection class IP67, permits reliable operation of the machine in typical adverse everyday conditions.

Two housing variants
Appropriate selection of the antennae connection permits easy integration into the available construction space.

Freely programmable
Combined with comprehensive libraries, the Linux operating and development ecosystem facilitates rapid and independent application development.

Networking on the machine
The TC3G can be connected to the vehicle network or the vehicle control unit via CAN bus and Ethernet so that relevant machine data (machine status, operating hours, maintenance status) can be read.

Wireless connection
The data module permits ideal wireless communication for any form of data transmission (WLAN, Bluetooth, 2G/ 3G).

Remote access & Cloud
machines.x offers comprehensive software solutions for local data analysis, connection to the “machines.cloud” Cloud solution as well as remote access to the machine.

Robustness
Through the compliance with the standards for conformity in accordance with CE, E1 and RoHS as well as the compliance with the standards for the automotive, agricultural and construction machine industry, the TCG-4 facilitates application possibilities in extreme environmental conditions (temperatures, vibrations etc.)

Statements
TC3G is a product of
Sensor-Technik Wiedemann GmbH
All rights are reserved.

 

 

Specifications

 Description
Interfaces
CAN2 x CAN 2.0 B ( 1 1 Bit and 29 Bit identifier), low/high-speed up to 1 Mbit/s
RS232(Serial connection) programmable baud rate
EthernetIEEE 802.3, 10/100 Mbit
Available with extension board
2G/3G Modem (optional CDMA)Five bands UMTS/HS P A+, (WCDMA/FDD) (850/800, 900,
1900 and 2100 MHz), Quad-band GSM (850/900/1800/1900
MHz) [on request also CDMA instead of 3G]
WLAN / BluetoothIEEE 802. 1 1 a,b,g,n, Bluetooth® 2.1+EDR, Power Class 1.5; Full support for BT4.0 BLE and ANT
GPS / GLONASSGLONASS and GPS parallel, 99 acquisition/ 33 tracking channels
Software
Operating systemLinux operating system board support package (incl. source code) open source development environment
System Data
Power supply9 ... 32 V DC
Current con- sumption350 mA at 12V
Internal temperature sensor
Real-time clockGold cap-bu f fered with wake-up and alarm function
Extension boards
3-axis acceleration sensorW ake-up function
I/O´s1 digital input, 1 digital output
T riColor LEDFreely-programmable signaling of operating statuses (visible through housing surface)
USB *11.1 / low & full-speed host interface
Mechanical Data
Connector19-pole mobile-compatible connector (Tyco / AMP)
HousingIP 67 and 6k9k
DimensionsApprox. 134 mm x 1 17 mm x 36 mm (5.28" x 4.61" x 1.42")
- internal antennas --- approx. 183 mm x 1 17 mm x 36 mm
(7.21" x 4.61" x 1.42") - external antennas
Weight0.3 kg (0.67 lbs.)
Environmental Requirements
RequirementsInspection acc. standards for vehicle, agricultural machinery and the construction machinery industry as well as CE conformity
T emperature rangeIn operation: -30°C ... +70°C (-22°F ... +158°F) housing temperature
Processor System
Processor32 Bit controller, MPC5200B 400 MHz
RAM128 MByte
EEPROM8 kByte
NAND-Flash1 GByte
NOR-Flash64 MByte

Code: 1030110000700  ECU TC3GI

Yes, I am interested in receiving news updates and marketing information about Motronica products and services.
I have read and understood Motronica Cookie Statement and Data Protection Description