Products

NGS
15 May 2019
TCG-4
15 May 2019
Show all

FELIX

Position sensor

The FELIX position sensor reliably records changes in distance of between 0 mm and 20 mm via a tappet made from hardened and tempered steel.

TECHNOLOGIES

The changes are recorded internally via two hall sensors, which measure the magnetic field of a specially-constructed round magnet. The position sensor is therefore particularly resistant to contamination at the measuring point. It is characterized amongst other things by its particularly high robustness with high linearity and an operating temperature range from −30 °C to +120 °C. Due to the sealed housing, it can be screwed into hydraulic oil and guarantees a long lifetime due to the use of contactless technology.

Statements
FELIX is a product of
Sensor-Technik Wiedemann GmbH
All rights are reserved.
 

Specifications

Gyroscope Sensor
Nominal Stroke20 mm
Mechanical Stroke23 mm
Linearity± 0.8 mm
Actuating force22 … 24 N
Hysteresis< ± 0.1 %
Operating temperature−30 … +120 °C / -22 ... 248 °F
Storage temperature−40 … +140 / -40 ... 248 °F
Temperature deviation< ± 0.01 %FS / K (typ.)
< ± 0.026 %FS / K (max.)
Measurement range0 … 20 mm
(Stroke in accordence with installation tolerances 0 … 23 mm, see drawing)
Material, housingSteel
Material, connectorGlass fiber reinforced plastic
Material, plungerCase hardened steel, HCR 60
Pressure resistance (plunger side)6 bar max. (Hydraulic oil)
ProtectionShort circuit, reversed polarity
Ingress protectionIP67
Electrical connection3-pol connector, AMP-Superseal 1,5
Supply voltage8 … 30 VDC
Current consumption≤ 30 mA
ResistanceSee load diagram
Output Signal4 … 20 mA, 3-wire-technique

Code: 1140201000200  POSITION SENSOR FELIX

Yes, I am interested in receiving news updates and marketing information about Motronica products and services.
I have read and understood Motronica Cookie Statement and Data Protection Description