Processor | Freescale I.MX6®, Solo, 800 MHz | |
Mass storage | 4 GByte | |
RAM | 512 Mbyte | |
RTC | Buffered by gold cup | |
Temperature range | Operating: -30..+65°C Storage: -40..+85°C | |
Electrical |
Display | TFT Color Graphic LCD with LED backlight | |
Resolution | 800 x 480 px (WVGA), 15:9 | |
Colors | 262k | |
Brightness | typ. 400 cd/m² | |
Contrast Ratio | typ. 500:1 | |
Size | 7”, 152 mm (W) x 91 mm (H) | |
Touch | PCT | |
Indicators and sensors | • Light sensor
• 1 Multicolor-LED
• 3 Status-LED ’ s | |
Power requirements | System supplied through terminal 30 (battery +, see pinout) and 31 (battery -, see pinout).
Terminal 15 (ignition) to be used to switch on/off.
9 … 36 V DC | Short circuit protection.
Over-voltage resistance up to 48V for max. 5 minutes.
Inverse polarity protection up to -48 V DC for max. 5 minutes. |
Interfaces |
CAN bus | 2 x CAN-Interfaces according to ISO 1 1898 | CAN specification 2.0 B active,
up to 1 Mbit/s (default 250 Kbit/s, 500 Kbit/s, 750 Kbit/s and 1 Mbit/s) |
RS 232 | 1 x RS232-Interface | Type: EIA232 (only RxD, TxD, GND), Speed: max. 115 Kbps |
USB | HOST 2.0 | Main connector: 1 x High speed
On front: 1 x USB slot High speed |
Ethernet | 1 x 10/100 Mbit/s Base T | |
Buzzer | Yes | 80 dB @ 1kHz in 1 m distance |
Inputs | 4 configurable analog/digital inputs | Input impedance: > 3k Ohm
Resolution: 10 bit (1024 digits, 1 digit = 11,7 mV)
Voltage range: 0 … 12 V
Over-voltage protection: Up to 36 V DC
Short circuit protection: Up to 36 V DC
Frequency: Max. signal frequency 50 Hz
Special: DI4 can be configured (HW-Option) as wake-up-input |
Outputs | 3 digital outputs | Short circuit protection: Up to 36 V
Imax 300 mA open drain RDS,on < 1 Ohm RDS,o f f > 100 kOhm |
Video-Interface | • Inputs: 3x analog (1 live stream) • Vss 1 V • Camera supply: 12 V DC • Max. current: 500 mA
• Output: 1x camera control output (open drain) on each interface for special func- tionality
(mirror, shutter, heating etc.), Ampacity: 300mA |
Connectors |
Main | T yco-AMP 1437288-6 | Mating connector (customer) T yco-AMP 3-1437290-7
Mating crimp contact (customer) T yco-AMP 3-1447221-4 |
V ideo | M12 round connector , female, 5-pole, B-coded, acc. to EN 61076-2-101 | Recommended mating connector type according
to IEC 61076-2-10: MM 005-Gx1-Bx) A, C, I, P, R or S-type |
Ethernet | M12 round connector , female, 4-pole, D-coded acc. to EN 61076-2-101 | Recommended mating connector type according
to IEC 61076-2-10: MM 004-Gx1-Dx) A, C, I, P, R or S-type |
Software |
Operating System | Linux, kernel 3.0.0 or higher | |
Application Programming | Motronica M- V ision | • OPUS Projektor • Optional: Codesys-Tools (3.5)
• Optional: ISO-VT • Optional: C/C++ |
Testing and verification |
CE-Compliance | EU Directive 2014/30/EU (EMC) according to
• EN 12895: Industrial Trucks – Electromagnetic compatibility
• EN 13309: Construction machinery – Electromagnetic compatibility of machines with internal electrical power supply
• EN ISO 14982: Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria |
E1 - Type approval | EU Directive ECE R 10.4 |
Protection Level (IP Code) | IP 65 and IP 66 according to ISO 20653: Road Vehicles
– Degrees of protection (IP-Code) – Protection of electrical equipment against foreign objects, water and access. |
Electrical | 12 and 24V -Systems according to ISO 16750-2: Road V ehicles – Environmental conditions and testing for electrical and electronic equipment – Electrical loads | ISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions |
Mechanical | • ISO 16750-3: Road Vehicles – Environmental conditions and testing for electrical and electronic equipment – Mechanical loads, Code L
• ISO 15003: Agricultural Engineering – Electrical and electronic equipment – Testing resistance to environmental conditions
• Mechanical Shock: Level 2 • Random Vibration: Level 2 • Sinusoidal Vibration: Level 2 |
Climate | • ISO 16750-4: Road Vehicles – Environmental conditions and testing for electrical and electronic equipment – Climatic Loads
• Operating Temperature Range: -30 … +65°C • Storage Temperature Range: -40 … +85°C
• ISO 15003: Agricultural Engineering – Electrical and electronic equipment – Testing resistance to environmental conditions |