Products

OPUS A3 / A6 / A8 cablaggio video per telecamere Wachendorff, lunghezza 0,5 m (M12-BNC)
14 febbraio 2017
OPUS A3 STANDARD BASIC
14 febbraio 2017
Show all

OPUS A3 ECO FULL

OPUS A3 ECO FULL
Garantisce tutte le esigenze di base 

Un sacco di tecnologia – a basso costo di investimento. Questo slogan descrive opportunamente l’Opus A3E. Questa console full-value per operatore  dispone di uno schermo da 4,3 “con 480 x 272 pixel ed è facoltativamente disponibile con un display touchscreen.
Un punto in più  all’ OPUSA3e è il relativo peso: più meno di 1kg. All’interno  un potente e affidabile 32-bit, 532 MHz, con opzione di memoria che vanno da un minimo di 512 MB, fino a 1 GB.
Dotato di un LED multicolore, 4 ingressi analogici o digitali, 2 porte CANBUS e un’interfaccia KiB USB 2,0, questa unità a basso costo non è priva di funzionalità. L’ Opus A3e: alte prestazioni ad un prezzo di base.

Allarme Acustico
Per assicurare un monitoraggio affidabile, la versione full line dell’Opus A3E è dotata di un allarme acustico con un’uscita fino a 65 dBA. Questo lo rende particolarmente adatto come unità parametrisation e utilizza il sistema operativo di fiducia Linux embedded.

Potete contare su di esso: l’Opus A3E offre il miglior rapport prezzo-prestazione ed è disponibile sul mercato nella sua categoria.

Dichiarazioni
OPUS A3 ECO FULL è un prodotto di
Topcon Electronics

Tutti i diritti sono riservati.

Specifications

Hardware
ProcessorFreescale I.MX35®, 532 MHz
Mass storage1 GByte (approx. 900 MB for customer use)
RAM256 Mbyte
RTCBuffered by battery
Temperature rangeOperating: -30..+75°C Storage: -40..+85°C
Electrical
DisplayTFT Color Graphic LCD with LED backlight
Resolution480 x 272 px (WQVGA), 15:9
Colors16.7 Mio.
Brightnesstyp. 400 cd/m²
Contrast Ratiotyp. 400:1
Size4.3”, 95 mm (W) x 53 mm (H)
TouchAnalogue resistive
Indicators and sensors• Light sensor • 1 Multicolor-LED
Power requirements9 … 36 V DCShort circuit protection.
Overvoltage resistance: 48 V for max. 2 minutes. Inverse polarity protection: up to -48 V DC for max. 5 minutes
Interfaces
CAN bus2 x CAN-Interfaces according to ISO 1 1898CAN specification 2.0 B active,
up to 1 Mbit/s (default 250 Kbit/s, 500 Kbit/s, 750 Kbit/s and 1 Mbit/s)
RS 2321 x RS232-InterfaceType: EIA232 (only RxD, TxD, GND), Speed: max. 115 Kbps
USB1 x HOST 2.0Main connector: 1 x Full speed
Ethernet1 x 10/100 Mbit/s Base T
BuzzerYes• 60 dB(A) in 30 cm distance • Lifetime min. 1000h
Inputs4 configurable analog/digital inputsInput impedance: > 3k Ohm Resolution: 10 bit (1028 digits, 1 digit = 1 1,7 mV) V oltage range: 0 … 12 V
Max. protectable input voltage: 36 V DC Short circuit protection
Frequency: Max. signal frequency 50 Hz
Outputs3 digital outputsShort circuit protection: Up to 36 V
Imax 300 mA open drain RDS,on < 1 Ohm RDS,o f f > 100 kOhm
Connectors
MainT yco-AMP 1437288-6Mating connector (customer) T yco-AMP 3-1437290-7
Mating crimp contact (customer) T yco-AMP 3-1447221-4
V ideoM12 round connecto r , female, 5-pole, B-coded, acc. to EN 61076-2-101
EthernetM12 round connecto r , female, 4-pole, D-coded acc. to EN 61076-2-101
Software
Operating SystemLinux, kernel 2.6.28
Application ProgrammingMotronica M- V ision• Optional:Codesys- T ools (3.5)
• Optional: ISO-VT
• Optional: C/C++
• Optional: W achendor f f Projektor T ool
Testing and verification
CEEU Directive 2004/108/EC (EMC) according to
• EN 12895: Industrial T rucks – Electromagnetic compatibility
• EN 13309: Construction machinery – Electromagnetic compatibility of machines with internal electrical power supply
• EN ISO 14982: Agricultural and forestry machinery - Electromagnetic compatibility - T est methods and acceptance criteria
E1 - Type approvalEU Directive ECE R 10.4
Protection Level (IP Code)IP 6k5 and 6k7 according to ISO 20653: Road V ehicles – Degrees of protection (IP-Code) – Protection of electrical equipment against foreign objects, water and access
Electrical12 and 24 V -Systems according to ISO 16750-2: Road V ehicles – Environmental conditions and testing for electrical and electronic equipment – Electrical loadsISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions
Mechanical• ISO 16750-3: Road V ehicles – Environmental
conditions and testing for electrical and electronic equipment – Mechanical loads, Code L
• ISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions
• Mechanical Shock: Level 2
• Random V ibration: Level 2
• Sinusoidal V ibration: Level 2
Climate• ISO 16750-4: Road V ehicles – Environmental conditions and testing for electrical and electronic equipment – Climatic Loads
• Operating T emperature Range: -30 … +65°C
• Storage T emperature Range: -40 … +85°C
• ISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions
Yes, I am interested in receiving news updates and marketing information about Motronica products and services.
I have read and understood Motronica Cookie Statement and Data Protection Description