Products

OPUS A6 STANDARD BASIC
14 February 2017
OPUS A8 ECO BASIC
14 February 2017
Show all
1130207008700

OPUS A6 STANDARD FULL


OPUS A6 STANDARD FULL
For Perfectionists

The difference is in the sum of all the details. Where the features of the OPUS A6e are still not enough, there is always its ‘big brother’: the OPUS A6s. This model can offer many additional and practically relevant features where the technical demands are greater. It offers a bright 7” display coupled with up to three video inputs.

The full-speed USB 2.0 input on the front is best suited to high-speed data exchange and is positioned in the casing of the unit for maximum protection against the elements. Available as a standalone or dashboard solution, the unit offers twelve softkeys and three hardkeys, plus four digital or analog inputs.
A multi-color LED and a standard LED provide immediate visual indication to the operator of any faults detected.

Two CANbus Ports
The high-performance, 32-bit, 532 MHz processor and the memory capacity of either 512 MB or 1 GB of RAM plus 128 or 256 MB of DDR2 make the OPUS A6s a powerful heavyweight. Fitted with two CANbus ports, it leaves no wish unfulfilled. A front-mounted, high-speed USB port and 3 camera inputs can also be included as optional extras. Problem-free functionality is assured by the trusted Embedded Linux operating system.

Statements
OPUS A6 STANDARD FULL is a product of
Topcon Electronics

All rights are reserved.

 

Specifications

Hardware
ProcessorFreescale I.MX35®, 532 MHz
Mass storage1 GByte (approx. 900 MB for customer use)
RAM256 Mbyte
RTCBuffered by gold cup
Temperature rangeOperating: -30..+65°C Storage: -40..+85°C
Electrical
DisplayTFT Color Graphic LCD with LED backlight
Resolution800 x 480 px (WVGA), 15:9
Colors262k
Brightnesstyp. 400 cd/m²
Contrast Ratiotyp. 500:1
Size7”, 152 mm (W) x 91 mm (H)
TouchAnalog resistive
Indicators and sensors• Light sensor
• 1 Multicolor-LED
• 3 Status-LED ’ s
Power requirements9 … 36 V DCShort circuit protection.
Over-voltage resistance: 48 V for max. 2 minutes. Inverse polarity protection: up to -48 V DC for max. 5 minutes
Interfaces
CAN bus2 x CAN-Interfaces according to ISO 1 1898CAN specification 2.0 B active,
up to 1 Mbit/s (default 250 Kbit/s, 500 Kbit/s, 750 Kbit/s and 1 Mbit/s)
RS 2321 x RS232-InterfaceType: EIA232 (only RxD, TxD, GND), Speed: max. 115 Kbps
USB1 x HOST 2.0Main connector: 1 x Full speed
Ethernet1 x 10/100 Mbit/s Base T
BuzzerYes• 60 dB(A) in 30 cm distance • Lifetime min. 1000h
Inputs4 configurable analog/digital inputsInput impedance: > 3 kOhm Resolution: 10 bit (1028 digits, 1 digit = 1 1,7 mV) V oltage range: 0 … 12 V
Max protectable input voltage: 36 V DC Short circuit protection
Frequency: Max. signal frequency 50 Hz
Outputs3 digital outputsShort circuit protection: Up to 36 V
Imax 300 mA open drain RDS,on < 1 Ohm RDS,o f f > 100 kOhm
Connectors
MainT yco-AMP 1437288-6Mating connector (customer) T yco-AMP 3-1437290-7
Mating crimp contact (customer) T yco-AMP 3-1447221-4
V ideoM12 round connecto r , female, 5-pole, B-coded, acc. to EN 61076-2-101
EthernetM12 round connecto r , female, 4-pole, D-coded acc. to EN 61076-2-101
Software
Operating SystemLinux 2.6.28
Application ProgrammingMotronica M- V ision• Optional:Codesys- T ools (3.5)
• Optional: ISO-VT
• Optional: C/C++
• Optional: W achendor f f Projektor T ool
Testing and verification
CEEU Directive 2004/108/EC (EMC) according to
• EN 12895: Industrial T rucks – Electromagnetic compatibility
• EN 13309: Construction machinery – Electromagnetic compatibility of machines with internal electrical power supply
• EN ISO 14982: Agricultural and forestry machinery - Electromagnetic compatibility - T est methods and acceptance criteria
E1 - Type approvalEU Directive ECE R 10.4
Protection Level (IP Code)IP 6k5 and IP 6k7 according to ISO 20653: Road V ehicles – Degrees of protection (IP-Code) – Protection of electrical equipment against foreign objects, water and access
Electrical12 and 24 V -Systems according to ISO 16750-2: Road V ehicles – Environmental conditions and testing for electrical and electronic equipment – Electrical loadsISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions
Mechanical• ISO 16750-3: Road V ehicles – Environmental
conditions and testing for electrical and electronic equipment – Mechanical loads, Code L
• ISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions
• Mechanical Shock: Level 2
• Random V ibration: Level 2
• Sinusoidal V ibration: Level 2
Climate• ISO 16750-4: Road V ehicles – Environmental conditions and testing for electrical and electronic equipment – Climatic Loads
• Operating T emperature Range: -30 … +65°C
• Storage T emperature Range: -40 … +85°C
• ISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions

Code 1130207008900 DISPLAY OPUS A6 STANDARD FULL 7″ NEUTRAL CFG STD
Code 1141204002000 DISPLAY OPUS A6 STANDARD FULL 7″ NEUTRAL CODESYS

Code 1141204003800 DISPLAY OPUS A6 STANDARD FULL 7″ NEUTRAL ISO-VT