Products

OPUS A3 / A6 / A8 video cable for Wachendorff cameras, length 0,5 m (M12-BNC)
14 February 2017
OPUS A3 STANDARD BASIC
14 February 2017
Show all
1130207006000

OPUS A3 ECO FULL


OPUS A3 ECO FULL
All Basic Needs Covered

A lot of technology – at a low investment cost. This slogan fittingly describes the OPUS A3e. This full-value operator console features a 4.3” screen with 480 x 272 pixels and is optionally available with a touchscreen display.
A further plus point of the OPUSA3e is its weight: less than 1kg. Inside is a powerful and reliable 32-bit, 532 MHz processor, with memory option ranging from a minimum of 512 MB, up to 1 GB.
Equipped with a multi-color LED, 4 analogue or digital inputs, 2 CANbus ports and a fullspeed USB 2.0 interface, this low-cost unit is not lacking in functionality. The OPUS A3e: high performance at an entry-level price.

Acoustic Alarm
To assure reliable monitoring, the full line version of the OPUS A3e features an acoustic alarm with an output of up to 65 dBA. This makes it particularly suitable as a parametrisation unit, and it uses the trusted Embedded Linux operating system.
You can count on it: the OPUS A3e offers the best priceto-performance ratio available on the market in its class.

Statements
OPUS A3 ECO FULL is a product of
Topcon Electronics

All rights are reserved.

Specifications

Hardware
ProcessorFreescale I.MX35®, 532 MHz
Mass storage1 GByte (approx. 900 MB for customer use)
RAM256 Mbyte
RTCBuffered by battery
Temperature rangeOperating: -30..+75°C Storage: -40..+85°C
Electrical
DisplayTFT Color Graphic LCD with LED backlight
Resolution480 x 272 px (WQVGA), 15:9
Colors16.7 Mio.
Brightnesstyp. 400 cd/m²
Contrast Ratiotyp. 400:1
Size4.3”, 95 mm (W) x 53 mm (H)
TouchAnalogue resistive
Indicators and sensors• Light sensor • 1 Multicolor-LED
Power requirements9 … 36 V DCShort circuit protection.
Overvoltage resistance: 48 V for max. 2 minutes. Inverse polarity protection: up to -48 V DC for max. 5 minutes
Interfaces
CAN bus2 x CAN-Interfaces according to ISO 1 1898CAN specification 2.0 B active,
up to 1 Mbit/s (default 250 Kbit/s, 500 Kbit/s, 750 Kbit/s and 1 Mbit/s)
RS 2321 x RS232-InterfaceType: EIA232 (only RxD, TxD, GND), Speed: max. 115 Kbps
USB1 x HOST 2.0Main connector: 1 x Full speed
Ethernet1 x 10/100 Mbit/s Base T
BuzzerYes• 60 dB(A) in 30 cm distance • Lifetime min. 1000h
Inputs4 configurable analog/digital inputsInput impedance: > 3k Ohm Resolution: 10 bit (1028 digits, 1 digit = 1 1,7 mV) V oltage range: 0 … 12 V
Max. protectable input voltage: 36 V DC Short circuit protection
Frequency: Max. signal frequency 50 Hz
Outputs3 digital outputsShort circuit protection: Up to 36 V
Imax 300 mA open drain RDS,on < 1 Ohm RDS,o f f > 100 kOhm
Connectors
MainT yco-AMP 1437288-6Mating connector (customer) T yco-AMP 3-1437290-7
Mating crimp contact (customer) T yco-AMP 3-1447221-4
V ideoM12 round connecto r , female, 5-pole, B-coded, acc. to EN 61076-2-101
EthernetM12 round connecto r , female, 4-pole, D-coded acc. to EN 61076-2-101
Software
Operating SystemLinux, kernel 2.6.28
Application ProgrammingMotronica M- V ision• Optional:Codesys- T ools (3.5)
• Optional: ISO-VT
• Optional: C/C++
• Optional: W achendor f f Projektor T ool
Testing and verification
CEEU Directive 2004/108/EC (EMC) according to
• EN 12895: Industrial T rucks – Electromagnetic compatibility
• EN 13309: Construction machinery – Electromagnetic compatibility of machines with internal electrical power supply
• EN ISO 14982: Agricultural and forestry machinery - Electromagnetic compatibility - T est methods and acceptance criteria
E1 - Type approvalEU Directive ECE R 10.4
Protection Level (IP Code)IP 6k5 and 6k7 according to ISO 20653: Road V ehicles – Degrees of protection (IP-Code) – Protection of electrical equipment against foreign objects, water and access
Electrical12 and 24 V -Systems according to ISO 16750-2: Road V ehicles – Environmental conditions and testing for electrical and electronic equipment – Electrical loadsISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions
Mechanical• ISO 16750-3: Road V ehicles – Environmental
conditions and testing for electrical and electronic equipment – Mechanical loads, Code L
• ISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions
• Mechanical Shock: Level 2
• Random V ibration: Level 2
• Sinusoidal V ibration: Level 2
Climate• ISO 16750-4: Road V ehicles – Environmental conditions and testing for electrical and electronic equipment – Climatic Loads
• Operating T emperature Range: -30 … +65°C
• Storage T emperature Range: -40 … +85°C
• ISO 15003: Agricultural Engineering – Electrical and electronic equipment – T esting resistance to environmental conditions

Code 1130207006100 DISPLAY OPUS A3 ECO FULL 4,3″ CFG STD
Code 1141202001000 DISPLAY OPUS A3 ECO FULL 4,3″ CODESYS
Code 1141204003100 DISPLAY OPUS A3 ECO FULL 4,3″ ISO-VT”