ESX-MBC
I/O Module
With its EXS-MBC, Sensor-Technik Wiedemann presents a new CAN J1939 module for the control of electromotors and actuators within the performance range of up to approx. 200 W, especially suited for agricultural and construction industry vehicles. It offers four fast PWM half-bridges (10 A each) featuring current measurement and two additional performance digital outputs (4 A each). 2 half-bridges, which can be combined to one motor full bridge, and one digital output are supplied via one safety relay (max. 15 A per safety relay).
The module also features four multi-function inputs, one module identification input, one digital output and one fixed voltage output for the sensor supply. All analog signals are processed with a resolution of 12 bit. motors and other actuators in the power range up to approximately 200 W, that is suitable construction machinery
Statements
ESX-MBC is a product of
Sensor-Technik Wiedemann GmbH
All rights are reserved.
Description | |
---|---|
Interfaces | |
CAN | CAN 2.0 B interfaces, low / high speed up to 1 MBit/s |
System Data | |
Power supply | 9 ... 32 V DC |
In/Outputs | |
Sensor power supply_12V | 1 x 5 ... 12 V (max. load current 60 ... 250 mA), stabilized supply voltage, short-circuit proof |
Digital output_ 200mA_HS | 1 x 200 mA digital output, short-circuit proof, diagnosable |
Digital / PWM output_4A_ HSC | 2 x 4 A digital outputs, short-circuit proof, diagnosable, with current measurement |
PWM out- put_10A | 4 x 10 A PWM half-bridges with current measurement, PWM- frequencies up to 20 kHz, short-circuit proof and diagnosable |
ID_Pin | 1 x module identification pin |
Multi-function input_UIFD | 4 x multi-function inputs, which can be switched as analog, digital and speed inputs via software. The inputs are short- circuit proof and diagnosable. |
Mechanical Data | |
Connector | 42-pole mobile-compatible connector (Tyco / AMP) |
Housing | IP 65 and IP 69k, plastic housing |
Dimensions | Approx. 174 mm x 117 mm x 36 mm (6.85" x 4.61" x 1.42") |
Environmental Requirements | |
Requirements | Inspections acc. standards and requirements for vehicle, agricultural machinery and the construction machinery industry as well as CE conformity |
Operating temperature | -40°C ... +85°C (-40°F ... +185°F) operating temperature (derating dependent on operating condition) |
Processor System | |
EEPROM | 32 kByte |
Processor | 32-bit controller, 120 MHz |
SRAM | 128 kByte |
Code 1030114000100 UNIT ESX-MBC
ESX-MBC
Modulo I/O
Con il suo EXS-MBC, Sensor-Technik Wiedemann presenta un nuovo modulo CAN J1939 per il controllo di electromotor e attuatori all’interno della gamma con prestazioni fino a circa 200 W, particolarmente adatto per i veicoli agricoli e dell’industria edile. Esso offre quattro veloci PWM mezzo-ponti (10 a ciascuno) con la misurazione della corrente e due prestazioni aggiuntive digitali (4 a ciascuno). 2 mezzi-ponti, che possono essere combinati ad un motore ponte pieno e una uscita digitale sono forniti tramite un relè di sicurezza (max. 15 a per relè di sicurezza).
Il modulo dispone inoltre di quattro ingressi multifunzione, un ingresso di identificazione del modulo, una uscita digitale e una tensione di uscita fissa per l’alimentazione del sensore. Tutti i segnali analogici vengono elaborati con una risoluzione di motori a 12 bit e altri attuatori nella gamma di potenza fino a circa 200 W, che sono adattabili su macchine edili.
Dichiarazioni
ESX-MBC è un prodotto di
Sensor-Technik Wiedemann GmbH
Tutti i diritti sono riservati.
Description | |
---|---|
Interfaces | |
CAN | CAN 2.0 B interfaces, low / high speed up to 1 MBit/s |
System Data | |
Power supply | 9 ... 32 V DC |
In/Outputs | |
Sensor power supply_12V | 1 x 5 ... 12 V (max. load current 60 ... 250 mA), stabilized supply voltage, short-circuit proof |
Digital output_ 200mA_HS | 1 x 200 mA digital output, short-circuit proof, diagnosable |
Digital / PWM output_4A_ HSC | 2 x 4 A digital outputs, short-circuit proof, diagnosable, with current measurement |
PWM out- put_10A | 4 x 10 A PWM half-bridges with current measurement, PWM- frequencies up to 20 kHz, short-circuit proof and diagnosable |
ID_Pin | 1 x module identification pin |
Multi-function input_UIFD | 4 x multi-function inputs, which can be switched as analog, digital and speed inputs via software. The inputs are short- circuit proof and diagnosable. |
Mechanical Data | |
Connector | 42-pole mobile-compatible connector (Tyco / AMP) |
Housing | IP 65 and IP 69k, plastic housing |
Dimensions | Approx. 174 mm x 117 mm x 36 mm (6.85" x 4.61" x 1.42") |
Environmental Requirements | |
Requirements | Inspections acc. standards and requirements for vehicle, agricultural machinery and the construction machinery industry as well as CE conformity |
Operating temperature | -40°C ... +85°C (-40°F ... +185°F) operating temperature (derating dependent on operating condition) |
Processor System | |
EEPROM | 32 kByte |
Processor | 32-bit controller, 120 MHz |
SRAM | 128 kByte |