Products

Scheda di espansione
10 Febbraio 2017
ESX-C
13 Febbraio 2017
Show all

ESX-3CM

ESX-3CM
Controllore Centrale Integrato

L’ ESX-3cm, l’ultima aggiunta alla linea vincente ESX di STW per controllori off-Highway, è un controllore liberamente programmabile costruito per l’uso in condizioni accidentate e supportata dalla  serie completa di utensili di STW.

Ottimizzazione dei Costi Attraverso Configurazioni Predefinite

Il focus dei 3cm è sull’ottimizzazione di costo con l’uso delle configurazioni predefinite. Le configurazioni disponibili si basano sulla vasta analisi di STW sul mercato dei fuoristrada.

Nuove capacità di Comunicazione e Networking 
L’ ESX-3cm ha nuove capacità di comunicazione: oltre all’interfaccia RS232 e quattro connessioni CAN, è disponibile un’interfaccia Ethernet opzionale con un connettore dedicato. Uno can bus dispone di una funzione di sveglia e c’è anche un’opzione per un’interfaccia RS485.

Prossima Versione

Una versione più recente, prevista per il 2016, è progettata per supportare le applicazioni di sicurezza in conformità con PLD (DIN EN ISO13489-1 2008-12) o SIL 2 (IEC 61508 edizione 2,0 2010-04).

Caratteristiche General

  • Con I/O analogico e digitale 56, il freelyprogrammable ESX-3cm è concepito come centralina di comando per l’automazione della macchina.
  • 20 ingressi multifunzione, la cui funzionalità può essere regolata tramite software
  • Possibilità di registrare corrente, tensione, frequenza o condizioni di commutazione digitale (eventi) all’ingresso.
  • Per sistemi che richiedono un’elevata capacità di commutazione è disponibile un totale di tre gruppi di potenza con quattro o otto uscite.
  • Ogni gruppo può fornire fino a 15A in totale.
  • Gli attuatori con requisiti di potenza superiore possono essere guidati anche attraverso la commutazione parallela di più uscite all’interno di un gruppo.
  • Processore a 32bit MHz Tricore di potenza superiore
  • Supervisore sistema separato con watchdog programmabile
  • Ambienti di sviluppo collaudati per C e CoDeSys
  • Pieno supporto della configurazione KEFEX di STW e strumenti aggiornati
  • Soddisfa le norme di conformità secondo CE e E1, nonché le norme per le industrie dei veicoli passeggeri, agricoli e delle macchine edili.

Dichiarazioni
ESX-3CM è un prodotto di
Sensor-Technik Wiedemann GmbH
Tutti i diritti sono riservati.

Specifications

Description
PROCESSOR
32 bit TriCore @ 300 MHz
Separate system supervisor with programmable watchdog
MEMORY
SRAM (Processor internal): 288 kB
SDRAM (external): 8 MB
Flash (Processor internal): 4 MB
EEPROM: 32 kB
INTERFACES
4 x CAN or 3 x CAN and 1 x RS485
1 x RS232
1 x Ethernet (optionally)
In/Outputs
8 x analog input
8 x multifunction inputs 5 V *4
12 x multifunction inputs 35 V *5
4 x digital / PWM output 4 A with current measurement
16 x digital / PWM output 4 A with current feedback
8 x digital outputs
SAFETY
Safety variant SIL 2 / PL d in preparation
PROGRAMMING
„C“, CODESYS V3.x

    Sì, sono interessato a ricevere notizie aggiornate e informazioni di marketing sui prodotti e servizi Motronica.
    Ho letto e compreso la Privacy Policy e i Termini e Condioni di questo sito
    Scheda di espansione
    10 Febbraio 2017
    ESX-C
    13 Febbraio 2017
    Show all

    ESX.3cm

    ESX.3cm
    Control units

    The ESX.3cm is a compact, robust and efficient controlunit. In addition to the ESX.3cs, an ESX.3cm (C =Compact, M=Medium) rounds off the third generation of ESX control units.

    TECHNOLOGIES

    The “C” stands for “Compact” and indicates that all pins are fixed assigned prior to the hardware definition. The functions of these pins can be defined in more detail using software. Both control units are also suitable for safety-oriented applications up to Performance Level PL d or Safety Integrity Level SIL 2, and are based on a common architectural concept:
    The robust aluminum die cast housing with automotive plug-in connectors contains a fast 32-bit microcontroller with four MB Flash and eight MB SRAM, up to four CAN interfaces, one serial interface and several LEDs.

    Safety and diagnostic capability
    A second, independent processor monitors the various system voltages and the program sequence. If required, this switches off all outputs via a second shut-down method or resets the main controller. Digital and analog feedback for almost all signal branches permit comprehensive diagnostics for the system including the inputs and outputs.
    For safety-oriented applications, a safety layer API is available which permits the separation of safety and non-safety (feedback-free) application sections using a memory protection unit. This makes the effort required for recertification in case of changes to the (non-safety) application software substantially easier. The creation and updating of a safety-oriented application can be conveniently carried out using a safety manual and a diagnostics library.

    Software
    The application software for the ESX.3cm can be highly efficiently created either in “C” or also CODESYS V3.5 IEC 61131-3. In the programming interface, numerous convenient functions such as current controllers and ramp functions for outputs or frequency averaging for inputs are integrated.

    Statements
    ESX.3cm is a product of
    Sensor-Technik Wiedemann GmbH
    All rights are reserved.

    Specifications

    Description
    PROCESSOR
    32 bit TriCore @ 300 MHz
    Separate system supervisor with programmable watchdog
    MEMORY
    SRAM (Processor internal): 288 kB
    SDRAM (external): 8 MB
    Flash (Processor internal): 4 MB
    EEPROM: 32 kB
    INTERFACES
    4 x CAN or 3 x CAN and 1 x RS485
    1 x RS232
    1 x Ethernet (optionally)
    In/Outputs
    8 x analog input
    8 x multifunction inputs 5 V *4
    12 x multifunction inputs 35 V *5
    4 x digital / PWM output 4 A with current measurement
    16 x digital / PWM output 4 A with current feedback
    8 x digital outputs
    SAFETY
    Safety variant SIL 2 / PL d in preparation
    PROGRAMMING
    „C“, CODESYS V3.x

    Code: 1030115000100 ECU 3CM OPT1 FR

      Sì, sono interessato a ricevere notizie aggiornate e informazioni di marketing sui prodotti e servizi Motronica.
      Ho letto e compreso la Privacy Policy e i Termini e Condioni di questo sito